AST-106 PAS Stunner Tester

Jarvis Products Corporation is introducing the Model AST 106 PAS Stunner Tester as a fast, accurate device for measuring bolt speeds on Jarvis’ Type C and Type P PAS (Power Actuated Stunner) Stunners.

AST-105 Air Stunner Tester

The Model AST 105 Stunner Tester as a fast, accurate device for testing the company’s Model USSS-1/2 penetrating, pneumatic stunner.

VC Sow Bung Cutter

The Jarvis Sow Bung System Model VC — for the cutting out of sow and hog bungs.

Spring Balancers

Safety devices to prevent load dropping – due to spring breakage

Air Balancers

The Jarvis Model BN-003 and BN-100 pneumatically operated balancers for correctly balancing a wide variety of tools

SER 200/400 Reciprocating Saw

The Jarvis Models SER 200 and SER 400 — electrically powered reciprocating saws for production breaking and general purpose use. The Model SER 200 (8 in / 203 mm) and the Model SEr 400 (16 in / 406 mm) are electric saws suitable for production breaking and general purpose use on beef, hogs, sheep and veal.

SEC 280-4 Circular Saw

The Jarvis Model SEC 280-04 — electric powered circular breaking saw. The SEC 280-04, with a 4 inch (102 mm) depth of cut, is ideally suited for:

SEC 230-4 Circular Saw

The Jarvis Model SEC 230-4 — electric powered circular breaking saw. The SEC 230-4, with a 3 inch (76 mm) depth of cut, is ideally suited for:

SEC 180-3 Circular Saw

The Jarvis Model SEC 180-3 electrically powered circular breaking saw with indexing depth gage. The SEC 180-3, with an adjustable 2.6 inch (65 mm) depth of cut, is ideally suited for:

SEC 180-2 Circular Saw

The Jarvis Model SEC 180-2 electrically powered circular breaking saw. The SEC 180-2, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for:

SHC 140/165 Circular Saw

The Jarvis Model SHC-140 and SHC-165 — hydraulic powered general purpose breaking saws. The right or left handed SHC-140, with a 1.5 in (38 mm) cutting depth, or SHC-165 with a 2 in (5 mm) cutting depth are ideally suited for:

MCS 300 Circular Saw

The Jarvis Model MCS 300 — multi-purpose pneumatically powered scribe saw. The MCS 300 with a full 2 hp motor and a maximum 4 3/8 inch (111 mm) depth of cut is ideally suited for primal cutting of:

SPC 140/165 Circular Saw

The Jarvis Model SPC 140 and Model SPC 165 — pneumatic powered general purpose breaking saws. The SPC 140, with a 1.5 in (38 mm) cutting depth, or SPC 165 with a 2 in (51 mm) cutting depth, are ideally suited for: